KTI Networks KS-2601 - Manual (Page 63)

59
13. Trunk
This switch supports three trunk connections and they are null by default. If
users want to use trunk function, follow the steps to configure it.
1. Select Enable in “Trunk Function” and click [Apply] to enable the function.
2. If you will create the trunk connection by 10/100M ports, you can enable
Trunk 1 or Trunk 2.
If you will create the trunk connection by gigabit ports, you can enable Trunk
3 and the gigabit ports will be in a trunk.
3. If Trunk 1 or Trunk 2 is selected, you can select the ports for them. And click
[Apply] to activate it.
If you want to disable trunk function, select “Disable” and click [Apply] button.
The switch will clear the Trunk configuration.
About redundant application . . .
The trunk connection supports redundant function. If any trunk cable is broken,
the traffic going through that cable will be transferred to another trunk cable in the
trunk connection automatically.