KTI Networks KS-2601 - Manual (Page 50)

46
5. Static Mac Address Table
This switch supports static Mac address assignment. You can assign static Mac
addresses by two methods.
a. Select from the Mac address list in “Dynamic Mac Address Table” page.
b. Assign manual. Enter a Mac address and select the port, then add this entry
to the static Mac address table.
The switch will not age out these static Mac addresses. But there is a limitation
for these static Mac addresses - they are allowed to work on the assigned port
only because they are static fixed on the assignment port.
If you want to delete an entry in the static Mac address table, click [Delete] button
of the entry and the static Mac address will be removed from the table.
About Port Security function . . .
You can configure “Mac Security Configuration” function for port access security
with Mac address. There are “Accept” and “Reject” modes for it.
“Accept” mode: Only the static address can access network via the port.
“Reject” mode: Only the static address cannot access network via the port.