KTI Networks KS-2601 - Manual (Page 65)

61
15. QoS
This switch supports four priority queues on each port for QoS operation.
Follow the steps to configure QoS function.
1. Select Enable in “QoS Function” and click [Apply] to enable the function.
2. If port-based priority is used, select ports for High and Low priorities. The
packets from High priority port will be forwarded to highest priority queue on
egress port. And the packets from Low priority port will be forwarded to
lowest priority queue on egress port.
3. For 802.1P tagged packet, its priority value is 0 ~ 7. Select the ports that
enable the 802.1P priority function, i.e. it will forward packet with the priority
information in tag. Then you can configure the 802.1P priority mapping to
priority queue of port.
4. Click [Apply] to activate the setting after configuration.
If you want to disable QoS operation, select Disable and click [Apply] button.