KTI Networks KS-2601 - Manual (Page 38)

34
7 0 No Security
8 0 No Security
9 0 No Security
10 0 No Security
11 0 No Security
12 0 No Security
13 0 No Security
14 0 No Security
15 0 No Security
Press any key to continue ...
=========================================================
The “Security Control” could be No, Accept, Reject modes. “No” is for no
Mac address security. “Accept” is for only the static Mac address can access.
“Reject” is for only the static Mac address cannot access.
3.23 show snmp command will show SNMP configuration of the switch.
For example,
>show snmp
[SNMP Configuration]
System Name :
Location :
Contact name :
Get Community : public
Set Community : private
=========================================================
Trap IP Address Community
=========================================================
1 0.0.0.0 public
2 0.0.0.0 public
3 0.0.0.0 public
4 0.0.0.0 public
5 0.0.0.0 public
=========================================================
3.24 show sta command will show spanning tree configuration of the switch.
For example,
>show sta
[Spanning Tree Configuration]
Spanning Tree Function: Disabled
Bridge Priority : 32768
Bridge Hello Time : 2
Bridge Max Age : 20
Bridge Forward Delay : 15
================================================================
Port Priority Path Cost State Designated Root
================================================================
1 128 19 None 00:00:00:00:00:00 [0]
2 128 19 None 00:00:00:00:00:00 [0]
3 128 19 None 00:00:00:00:00:00 [0]
4 128 19 None 00:00:00:00:00:00 [0]
5 128 19 None 00:00:00:00:00:00 [0]
6 128 19 None 00:00:00:00:00:00 [0]
7 128 19 None 00:00:00:00:00:00 [0]