Krell Industries S-1000 - Manual (Page 10)

Getting Started
6 Krell S–1000
The S–1000 Surround Preamp/processor provides a variety of con-
nection and operation options for outstanding music and cinema
soundtrack reproduction, and offers a high degree of flexibility via an
on-screen menu system. To setup the S–1000 quickly:
1. Connect the S–1000 to the rest of the components in your sys-
tem, using Figure 3 on page 14 and Table 1 on page 15 as a
guide. Please note:
On Screen Display (OSD). The S–1000 has three OSD outputs:
component, S-video, and composite. There is no OSD available
from the HDMI™ output.
To View the Setup Menu. Connect any of the OSD outputs on
the S–1000 to the appropriate input on your video display.
Press the remote control menu key. The front panel display
reads
MENU MODE
and all OSD outputs activate simultaneously.
Tune the video display input to match the selected OSD video
connection.
2. Enter the setup menu. The
MAIN MENU
screen appears on the video
display.
3. Using the video display and the remote, select
LISTENING ROOM
SETUP. The LISTENING ROOM SETUP
screen appears.
4. Select SPEAKER SETUP. The SPEAKER SETUP screen appears. Scroll
through the available options and select your loudspeaker setup.
5. Select SPEAKER DISTANCE and enter information about the placement
of your loudspeakers relative to your listening position.
6. Select SPEAKER LEVEL and calibrate the volume of your loudspeak-
ers.
After you have connected and configured the S–1000 and are famil-
iar with its basic features, you are ready to play music. See Oper-
ating the S–1000
, on page 58.
IMPORTANT:
ACCESSING THE
ON-SCREEN DISPLAY