Krell Industries S-1000 - Manual (Page 8)

Unpacking
4 Krell S–1000
Open the box and remove the top layer of foam. You see these
items:
1 S–1000 Surround Preamp/processor
1 IEC connector (AC power) cord
1 S–1000 handheld remote control
1 CR2025 lithium battery
1 12 VDC output (12 V trigger) cable
1 packet containing the S–1000 Quick Setup Guide
and the warranty registration card.
Carefully remove the S–1000 and accessories from the box.
Remove the foam end caps and protective plastic wrap from the
component.
If any of these items are not included in the shipping box, please contact
your authorized Krell dealer, distributor, or Krell for assistance. Save all
packing materials. If you must ship your S–1000 in the future, repack the
unit in its original packaging to prevent damage in transit. See Return
Authorization Procedure, on page 65.
Note