Krell Industries S-1000 - Manual (Page 48)

44 Krell S–1000
Use the
DTS CONTROL
menu to adjust the signal for DTS Neo:6 music
mode. The center gain adjusts the amount of center channel infor-
mation present in the left and right loudspeakers. The adjustment
range is 0 (no center channel information subtracted (wide sound
field) to 5 (maximum level of center channel information subtracted
from the left and right channels (focused sound field).
Select DTS CONTROL TRIM from the configure levels menu. The DTS
CONTROL screen appears:
After setting the selection, press the previous key (30) once to return
to the
CONFIGURE LEVELS
screen.
DTS Neo:6 music mode derives a 6.0 signal from two-channel material. For
more information on DTS Neo:6 Modes, see User Selectable Modes on
page 61.
System Configuration, continued
Step 3, Configure Level Adjustment
DTS Control Screen
DTS Control
HOW TO NAVIGATE
IN THE MENU MODE
1 Press the menu key (29) to enter and
exit the menu mode from the
operational mode.
2 Press the direction keys (33) to scroll
from line to line, and to scroll through
options within a line.
3 Press the enter key (32) to select and
set an option.
4 Use the directional keys to scroll to
the next line.
5 Press the prev key (30) to return to the
previous screen.
6 Press the pre key (1) to exit the menu
mode and place the S–1000 in the
stand-by mode.
Prev
Note