Krell Industries S-1000 - Manual (Page 41)

Krell S–1000 37
The final option on the
CONFIGURE DEVICES
menu is
CONFIGURE TRIGGER.
This option allows you to customize the operation of the four remote
output 12 VDC (12 Volt trigger) connectors (54) on the back panel.
Select
CONFIGURE TRIGGER
from the
CONFIGURE DEVICES
menu. The
CONFIGURE TRIGGER screen appears:
Use the direction and enter keys to select the source device.
Select
ALL TRIGGERS to configure all triggers at once, or choose
SELECTIVE to configure triggers individually. The delay is only avail-
able when a trigger is set to ENABLED. There is a three second delay
after you select
ENABLED,
before the trigger turns on. The trigger
turns off immediately when you select
DISABLED.
ALL TRIGGERS
This option sets all 4 triggers on for all devices. When ALL TRIGGERS is
active, the selected mode and delay applies to all four triggers.
When the device is configured, press the previous key (30) twice to
return to the
MAIN MENU
.
System Configuration, continued
Step 2, Configure Devices
Configure Trigger
Configure Trigger Screen
Prev