Krell Industries S-1000 - Manual (Page 13)

Krell S –1000 9
9 TV Button/Key
Press this button or key to select the television device.
10 CD Button/Key
Press this button or key to select the compact disc device.
11 Tuner Button/Key
Press this button or key to select the AM/FM tuner device.
12 Aux Button/Aux1 Key
Press this button or key to select an auxiliary device, such as
phono, tape, or an additional DVD, LD, CD, or VCR.
13 Game Button/Aux2 Key
Press this button or key to select a game.
14 Tape/VCR2 Button/St Key
Press this button or key to playback pre-recorded tapes. You
may also use this button or key to compare the output signal of
an analog tape recorder to an audio source. See Tape Input
and Output,
on page 58.
15 Stereo Button/LED/Key
Press this button to select stereo decoding. The blue LED illumi-
nates when this feature is engaged.
16 Mode 1 Button/LED/M1 Key
17 Mode 2 Button/LED/M2 Key
Use these buttons or keys to select available decoding modes
for incoming signals from an audio source, for example
DOLBY PLII
MOVIE.
Mode 1. The default mode for a signal is always selected by
Mode 1. The S–1000 activates the default mode assigned in the
configure devices menu. In the operational mode, use the mode 1
button or M1 key (16) to view and select or reset the default cod-
ing mode.
Mode 2. All modes that can be used for the incoming signal are
automatically stored in Mode 2. Use the mode 2 button or M2
key (17) to scroll through these other modes in the display win-
dow. The last mode displayed in Mode 2 is the selected mode.
The S–1000 automatically selects the assigned mode for the
available signal.
For information on decoding modes, see Table 1 on page 15, and
Appendix: Decoding Modes for the S–1000, on page 60.
Front Panel Description, continued
Input Device Selection
Buttons and LEDs,
continued
Decoding Modes