Krell Industries S-1000 - Manual (Page 28)

24 Krell S–1000
The S–1000 Surround Preamp/processor is shipped with factory
default selections in the configuration menus. For correct operation
and maximum performance, use the sequence starting below, on this
page, to configure the S–1000 through the interactive on-screen
menus. These menus are structured to guide you through the setup
process for your loudspeakers and for each device in your surround
sound system.
Configure the S–1000 loudspeaker positions in the listening room first,
then configure each source device connected to your system com-
pletely, before configuring the next source device.
To save your new configuration menus, or revert to the factory
defaults, see Saving and Recalling Customized Settings, and
Restoring the Factory System Settings,
on page 57.
Press the menu key. The front panel display reads
MENU MODE.
The
MAIN MENU screen appears.
System Configuration
ACCESSING
THE MAIN MENU
Main Menu Screen
HOW TO NAVIGATE
IN THE MENU MODE
1 Press the menu key (29) to enter and
exit the menu mode from the
operational mode.
2 Press the direction keys (33) to scroll
from line to line, and to scroll through
options within a line.
3 Press the enter key (32) to select and
set an option.
4 Use the directional keys to scroll to
the next line.
5 Press the prev key (30) to return to the
previous screen.
6 Press the pre key (1) to exit the menu
mode and place the S–1000 in the
stand-by mode.
Menu