Krell Industries S-1000 - Manual (Page 14)

10 Krell S–1000
18 Pro Logic II Button/LED/PL Key
Press this button or key to select the Dolby Pro Logic II modes
for Dolby Surround encoded material, including laser discs,
videotapes, television broadcasts, and compact discs.
The Dolby Pro Logic II modes are selected automatically if Dolby Digital
source material is encoded for Pro Logic. To turn off these modes,
press the Pro Logic II button.
19 Preamp Button/LED/Key
Press this button or key to send the signal from an analog input
directly to the volume control with no digital processing, using the
analog stage of the preamp. This function can be used for com-
ponents which have a high quality signal. See Assign Analog
Audio Inputs,
on page 33, for information on assigning the ana-
log input to one of the device buttons
(DVD, CABLE, SAT, VCR, TV, CD,
TUNER, AUX, GAME, TAPE/VCR2).
This feature is only available with a signal from an analog input. If you
attempt to use it with a signal from a digital input, The S–1000 on-
screen and front panel display will read
NOT ALLOWED.
20 Front Panel Display
The front panel window provides status messages for S–1000
operations, including volume and balance level, decoding mode,
and zone information. When a new device is selected, the physi-
cal inputs are displayed. The display turns off after 60 seconds
of inactivity.
Use the center, surr/back, and sub buttons or keys to make tempo-
rary loudspeaker output adjustments of +/- 10 dB. These temporary
changes revert to 0 dB when a new device is selected or when the
system is powered down. For more information, see Configure
Level Adjustment, on page 39.
21 Center Button/LED/Key
Use this button to adjust the center loudspeaker volume. Press
the center button or key, then use the volume knob or up and
down directional keys (26) to make the adjustments.
Phantom Center. Press the center button or key twice to acti-
vate. Press the center button twice again to deactivate. The
S–1000 generates a center channel for use when no center
channel is used.
Front Panel Description, continued
Display Window
Individualized
Channel Trim
Decoding Modes, continued
Note
Note