Krell Industries S-1000 - Manual (Page 31)

Krell S–1000 27
System Configuration, continued
Step 1, Listening Room Setup
The second option on the speaker main menu screen,
SPEAKER DIS-
TANCE , allows you to tell the S–1000 the exact location of each loud-
speaker in your system.
Select
SPEAKER DISTANCE
on the
SPEAKER MAIN MENU
. The
ROOM SETUP
screen appears:
Speaker Distance
Room Setup Screen
When you access the ROOM SETUP screen, the cursor is blinking at the
LEFT loudspeaker. Use the direction and enter keys to navigate the
screen, select loudspeakers, and enter the correct distance (0 to 30
feet) from the main listen position to the loudspeaker.
After all the distances are set, press the previous key (30) once to
return to the speaker main menu.
Any speaker not configured in the SPEAKER SETUP menu displays N/A (not
available) on the ROOM SETUP screen.
Note
HOW TO NAVIGATE
IN THE MENU MODE
1 Press the menu key (29) to enter and
exit the menu mode from the
operational mode.
2 Press the direction keys (33) to scroll
from line to line, and to scroll through
options within a line.
3 Press the enter key (32) to select and
set an option.
4 Use the directional keys to scroll to
the next line.
5 Press the prev key (30) to return to the
previous screen.
6 Press the pre key (1) to exit the menu
mode and place the S–1000 in the
stand-by mode.
Prev