Liebert STS2 - Manual (Page 21)

Output Power Wiring
13
5.0 O
UTPUT
P
OWER
W
IRING
The STS2/PDU standard model is provided with a circuit breaker for connecting to the load or a
remote distribution cabinet. Other distribution configurations are available.
The three main types of distributions available for the STS2/PDU are:
• Output Breaker
• Inline Panelboards—two panelboards (84 poles) on 250A units and four panelboards (168 poles)
on 400-800A units. Square D ® and General Electric panelboards are available to accommodate
bolt-in or plug-in breakers.
• Square D I-Line ® Panelboard—designed to accommodate up to 10 plug-in breakers from 100A
to 250A. Additionally, 300A to 400A breakers are available on 800A units.
For other optional distribution methods, contact your local Liebert representative or call
1-800-LIEBERT.
The STS2/PDU distribution may be mounted on either the right or left side at the customer’s option.
Location of output conduit connections is affected by the location of the output cabinet. See
Figures 8, 9, 12, 13, 16 and 17 for wiring a right-side distribution configuration and
Figures 10, 11, 14, 15, 18 and 19 for wiring a left-side distribution configuration. See Figures 23
through 44 for wiring.
See Table 7 for wiring the various output options.
5.1 Customer Connections
The customer is responsible for connections from the STS2/PDU distribution to the connected load,
either directly or through remote distribution cabinets.
Table 7
Distribution configurations
Distribution Type
For Details See
Electrical Output
Field Connections
Output Breaker
250A Figure 23
400-600A Figure 33
800A Figure 35
Inline Panelboards
250A Figure 30
400-800A Figure 31
I-Line (Square D) Figure 32