LevelOne GSW-2692 - Manual (Page 135)

Spanning Tree Algorithm Configuration
3-99
3
Web – Click Spanning Tree, STA, Configuration. Modify the required attributes, and
click Apply.
Figure 3-57 Configuring Spanning Tree
CLI – This example enables Spanning Tree Protocol, sets the mode to RSTP, and
then configures the STA and RSTP parameters.
Console(config)#spanning-tree 4-137
Console(config)#spanning-tree mode rstp 4-138
Console(config)#spanning-tree priority 45056 4-141
Console(config)#spanning-tree hello-time 5 4-139
Console(config)#spanning-tree max-age 38 4-140
Console(config)#spanning-tree forward-time 20 4-139
Console(config)#spanning-tree pathcost method long 4-141
Console(config)#spanning-tree transmission-limit 4 4-142
Console(config)#