LevelOne GSW-2692 - Manual (Page 42)

Configuring the Switch
3-6
3
Input Trunk Configuration Sets the input rate limit for each trunk 3-84
Output Port Configuration Sets the output rate limit for each port 3-84
Output Trunk Configuration Sets the output rate limit for each trunk 3-84
Port Statistics Lists Ethernet and RMON port statistics 3-85
Address Table 3-90
Static Addresses Displays entries for interface, address or VLAN 3-90
Dynamic Addresses Displays or edits static entries in the Address Table 3-91
Address Aging Sets timeout for dynamically learned entries 3-93
Spanning Tree 3-93
STA
Information Displays STA values used for the bridge 3-94
Configuration Configures global bridge settings for STA and RSTP 3-97
Port Information Displays individual port settings for STA 3-100
Trunk Information Displays individual trunk settings for STA 3-100
Port Configuration Configures individual port settings for STA 3-103
Trunk Configuration Configures individual trunk settings for STA 3-103
VLAN 3-105
802.1Q VLAN
GVRP Status Enables GVRP VLAN registration protocol 3-108
Basic Information Displays information on the VLAN type supported by this switch 3-108
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
3-109
Static List Used to create or remove VLAN groups 3-111
Static Table Modifies the settings for an existing VLAN 3-112
Static Membership by Port Configures membership type for interfaces, including tagged,
untagged or forbidden
3-114
Port Configuration Specifies default PVID and VLAN attributes 3-115
Trunk Configuration Specifies default trunk VID and VLAN attributes 3-115
Private VLAN 3-117
Information Displays Private VLAN feature information 3-118
Configuration This page is used to create/remove primary or community
VLANs
3-119
Association Each community VLAN must be associated with a primary VLAN 3-119
Table 3-2 Main Menu (Continued)
Menu Description Page