Parity, Parity 4-16 – LevelOne GSW-2692 User Manual

Page 194

Advertising
background image

Command Line Interface

4-16

4

Command Usage

The databits command can be used to mask the high bit on input from
devices that generate 7 data bits with parity. If parity is being generated,
specify 7 data bits per character. If no parity is required, specify 8 data bits per
character.

Example

To specify 7 data bits, enter this command:

Related Commands

parity (4-16)

parity

This command defines the generation of a parity bit. Use the no form to restore the
default setting.

Syntax

parity {none | even | odd}
no parity

none - No parity
even - Even parity
odd - Odd parity

Default Setting

No parity

Command Mode

Line Configuration

Command Usage

Communication protocols provided by devices such as terminals and modems
often require a specific parity bit setting.

Example

To specify no parity, enter this command:

Console(config-line)#databits 7
Console(config-line)#

Console(config-line)#parity none
Console(config-line)#

Advertising