LevelOne GSW-2692 - Manual (Page 311)

Address Table Commands
4-133
4
Address Table Commands
These commands are used to configure the address table for filtering specified
addresses, displaying current entries, clearing the table, or setting the aging time.
Console#show lacp sysid
Port Channel System Priority System MAC Address
-------------------------------------------------------------------------
1 32768 00-90-CC-8F-2C-A7
2 32768 00-90-CC-8F-2C-A7
3 32768 00-90-CC-8F-2C-A7
4 32768 00-90-CC-8F-2C-A7
Console#
Table 4-48 show lacp sysid - display description
Field Description
Channel group A link aggregation group configured on this switch.
System Priority * LACP system priority for this channel group.
System MAC Address * System MAC address.
* The LACP system priority and system MAC address are concatenated to form the LAG system ID.
Table 4-49 Address Table Commands
Command Function Mode Page
mac-address-table static Maps a static address to a port in a VLAN GC 4-134
clear mac-address-table
dynamic
Removes any learned entries from the forwarding database PE 4-135
show mac-address-table Displays entries in the bridge-forwarding database PE 4-135
mac-address-table
aging-time
Sets the aging time of the address table GC 4-136
show mac-address-table
aging-time
Shows the aging time for the address table PE 4-136