Flash/file commands, Copy, Table 4-25 – LevelOne GSW-2692 User Manual

Page 243

Advertising

Flash/File Commands

4-65

• Enabling jumbo frames will limit the maximum threshold for broadcast storm

control to 64 packets per second. (See the switchport broadcast command
on page 4-114.)

• The current setting for jumbo frames can be displayed with the show system

command (page 4-62).

Example

Flash/File Commands

These commands are used to manage the system code or configuration files.

copy

This command moves (upload/download) a code image or configuration file
between the switch’s flash memory and a TFTP server. When you save the system
code or configuration settings to a file on a TFTP server, that file can later be
downloaded to the switch to restore system operation. The success of the file
transfer depends on the accessibility of the TFTP server and the quality of the
network connection.

Syntax

copy file {file | running-config | startup-config | tftp | unit}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config | https-certificate |

public-key}

copy unit file

• file - Keyword that allows you to copy to/from a file.
• running-config - Keyword that allows you to copy to/from the current

running configuration.

• startup-config - The configuration used for system initialization.
• tftp - Keyword that allows you to copy to/from a TFTP server.
• https-certificate - Copies HTTPS certificate from TFTP server to switch.

Console(config)#jumbo frame
Console(config)#

Table 4-25 Flash/File Commands

Command

Function

Mode

Page

copy

Copies a code image or a switch configuration to or from flash

memory or a TFTP server

4-65

delete

Deletes a file or code image