LevelOne GSW-2692 - Manual (Page 235)

System Management Commands
4-57
4
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows how to set the system clock to 15:12:34, April 1st, 2004.
show calendar
This command displays the system clock.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Example
System Status Commands
light unit
This command displays the unit ID of a switch using its front-panel LED indicators.
Syntax
light unit [unit]
unit - specifies a unit in a switch stack to light the panel LEDs
Console#calendar set 15 12 34 1 April 2004
Console#
Console#show calendar
15:12:43 April 1 2004
Console#
Table 4-23 System Status Commands
Command Function Mode Page
light unit Displays the unit ID of a switch using its front-panel LED
indicators
NE, PE 4-57
show startup-config Displays the contents of the configuration file (stored in flash
memory) that is used to start up the system
PE 4-58
show running-config Displays the configuration data currently in use PE 4-60
show system Displays system information NE, PE 4-62
show users Shows all active console and Telnet sessions, including user
name, idle time, and IP address of Telnet clients
NE, PE 4-62
show version Displays version information for the system NE, PE 4-63