LevelOne GSW-2692 - Manual (Page 277)

Access Control List Commands
4-99
4
Example
This rule permits packets from any source MAC address to the destination address
00-90-cc-94-34-de where the Ethernet type is 0800.
Related Commands
access-list mac (4-97)
show mac access-list
This command displays the rules for configured MAC ACLs.
Syntax
show mac access-list [acl_name]
acl_name – Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Example
Related Commands
permit, deny 4-98
mac access-group (4-99)
mac access-group
This command binds a port to a MAC ACL. Use the no form to remove the port.
Syntax
mac access-group acl_name in
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• in – Indicates that this list applies to ingress packets.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Console(config-mac-acl)#permit any host 00-90-cc-94-34-de ethertype 0800
Console(config-mac-acl)#
Console#show mac access-list
MAC access-list jerry:
permit any host 00-90-cc-94-34-de ethertype 800 800
Console#