Lexmark 5021-0XX - Manual (Page 215)

Diagnostic aids 3-7
5021-0XX
Two alignment pages automatically print for the change made.
A correct adjustment is determined when the pages are held to
the light and the lines on both pages line up with each other.
Note: If you select the Continuous Option under Duplex Quick
Test, you will need to press the stop button to cancel the test.
5. Press Return to exit the registration menu.
Setting top margin
1. Select Registration.
2. Select Top Margin.
3. Adjust the top margin by increasing the value displayed using
Menu.
The range is 1 to 15. (Incremented or decremented by one for
each button press. Each one is equivalent to .7mm adjustment
of top margin.)
4. To save the value press Select.
A quick test page automatically prints for the change made.
Note: If you select the Continuous Option under Duplex Quick
Test, you will need to press the Stop button to cancel the test.
5. Press Return to exit the registration menu.
Print tests
The purpose of the diagnostic print tests is to verify that the printer
can print on media from each of the installed input options.
For each input source selected, the following choices are available:
Single (prints the print test page once).
Continuous (continue printing the print test page until Return or Stop
is pressed).
• Tray 1 = single, Tray 1 = continuous
• Tray 2 = single, Tray 2 = continuous (if installed)