Lexmark 5021-0XX - Manual (Page 272)

4-42 Service Manual
5021-0XX
8. Remove main drive gear assembly from printer.
Note: When reinserting the main drive gear assembly, ensure that
you start with the bottom right corner. This allows proper installation
of the assembly. The photo depicts proper removal and the first part
of reinstalling.
Waste toner feeder removal
1. Remove main drive gear assembly. See “Main drive gear
assembly removal” on page 4-41 .
2. Loosen two screws (A) of sensor base to allow free movement
of waste toner feeder.
A