Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 17)

CellPipe™ 20 Series User’s Guide 3-1
3 Command-Line Interface
CellPipe 20 Series units are managed through a command-line interface (CLI). You
set up a connection between your computer and the unit and use VT100 emulation
software to display configuration information on your computer and input commands
and parameter values to configure and manage the unit.
Syntax of command-line interface
Syntax for the CLI is as follows:
• >> prompt means commands can be entered without password
• < > means the parameters are compulsory
• [ ] means the parameters are optional
• | between parameters means either/or
• “...” around parameters means the enclosed are key words
• A “space” is necessary between a command and its corresponding parameter
Syntax of command-line interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Using the commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Bridging commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Routing commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6