Lucent Technologies CELLPIPE 7820-0766-004 - Manual (Page 9)

Introduction
Lucent TURN-UP
CellPipe™ 20 Series User’s Guide 1-3
Lucent TURN-UP
The CellPipe 20 Series Product Family supports the Lucent TURN-UP™ automated
CPE provisioning system. TURN-Up is enabled when a user powers up his unit and
allows service providers to quickly and efficiently distribute and provision CPE gear
without the use of truck-rolls. Furthermore, TURN-UP stores configuration
information on a central server, making configuration management efficient and easy.
! Caution: If you attempt to manually configure the unit, TURN-UP will be disabled.
To re-enable TURN-UP, you need to select the default command and reinstall the
factory default configuration.
CellPipe 20 Series management
CellPipe 20 Series units can be managed via three different connections:
• Console port
• Ethernet port
• WAN port
CellPipe 20 series units are managed through a command-line interface (CLI). Also,
rudimentary management can be accomplished with SNMP. You set up a connection
between your computer and the device and use VT100 emulation software to display
and change configuration information. See Chapter 3, “Command-Line Interface,”
for a description of all the commands in the command-line interface.