Lyngdorf Audio RoomPerfect RP-1 - Manual (Page 17)

1 7
Introduction to RoomPerfect™
Once the guided set-up has been successfully completed you have the option to listen to music through
two listening settings; Focus and Global room correction fi lters. To toggle between the two fi lters and
‘Bypass’ you simply press the Up/Down buttons on the front panel or remote control.They can also be
selected directly with the numerical buttons on the remote, 0 for bypass, 1 for Focus or 9 for Global.
Global Listening
The Global fi lter improves the sound quality across the whole room. When you are listening to music in
a room but are not sat in any particular listening position, the global fi lter gives the best result.
Focus Listening
The Focus fi lter improves the sound quality at a listening position by exploiting the 3-dimensional acous-
tic properties gained through the room measurements. This makes the Focus fi lter the best solution for
optimal sound quality at a specifi c listening position.
Voicing
When using RoomPerfect™ you will experience a much more precise and detailed sound reproduction
– which could also be described as more analytical.
The Voicing setting is an EQ fi lter that can be used to gently amplify or attenuate certain frequencies ac-
cording to your personal preferences and/or to compensate if a given recording sounds too ‘bright’ or too
‘dark’. The standard voicing settings, and their numerical value on the remote control, are:
• Neutral (0), Music 1 (1), Music 2 (2), Relaxed (3), Open (4), Open Air (5), Soft (6).
The frequency curves of the different voicing settings can be viewed in the appendix. Neutral is a bypass
setting.
You can toggle between neutral and the available voicings by pressing the Left/Right buttons on the re-
mote or front panel. The can also be selected directly by pressing “info” followed by the voicing number
on the remote control.