Lyngdorf Audio RoomPerfect RP-1 - Manual (Page 25)

2 5
Display
The sub menus accessible in the Display menu are:
Display
Display Timeout Disp. Brightness
Display Timeout
Display Timeout
Display Timeout
Display Timeout set-up is used for enabling/disabling the 10 sec. display ’switch’off’ feature. If enabled
the Main Display reading will switch off after 10 sec of inactivity from the front panel buttons or re-
mote.
Display Brightness
Display Brightness
Disp. Brightness
Display Brightness is used to control the brightness of the display. The brightness can be set to 25%,
50%, 75% or 100%.
Input Connection
Input Connection
The Input Connection can be set to:
Balanced / XLR or, •
Unbalanced / RCA •
The default setting is Balanced / XLR.
Remember to select the same input as physically connected.
If the setting is not correct you may experience humming.