Lyngdorf Audio RoomPerfect RP-1 - Manual (Page 7)

7
Front Panel
1 2 3 4
MENU MENU
ENTER ENTER
RP-1 Room Processor
Controls
The buttons/controls on the front panel of the RP-1 can all be operated with a direct press.
1. Mains Switch
Powers the RP-1 on/off.
2. Display
Display with all information on menu system and status.
3. Navigation Keys
Pressing the Enter button for 3 seconds will set the RP-1 in stand-by mode and turns On the RP-1 from
stand-by mode with a short press.
In normal operation mode the Up/Down toggles between the Focus and Global fi lter and Bypass where-
as the Left/Right toggles between neutral and the available voicings.
In menu mode used for navigation in the menu system: Up/Down, Left/Right & Enter. Pressing and hold-
ing down the Up/Down, Right/Left keys, changes some selected values fast.
4. Menu Button
Toggles Menu mode on/off and navigates one level back when in menu mode.