Lucent Technologies 9077 16S - Manual (Page 18)

1-2 October 22, 1999 SP Switch Router Adapter Guide - 1.4 Update 2
Introduction to the SP Switch Router Adapter card
What is the RS/6000 SP Switch Router ?
What is the RS/6000 SP Switch Router ?
The RS/6000 SP Switch Router is a high-performance switched IP router designed for
high-volume, large-scale public and private backbone applications.
It has these main features:
• Performs Layer-3 switching across 4-16 adapter slots, depending upon router model
• Supports large suite of dynamic routing protocols
• Accommodates multiple types of media, including HSSI, 10/100Base-T (fast Ethernet),
ATM OC-3c, ATM OC-12c, SONET OC-3c, HIPPI, and FDDI
• Provides basic filtering, OSPF multicast, SNMP v1
• Manages 150K-entry route table, batch updating with 20 routes per second
As shown in Figure 1-1, the SP Switch Router attaches to the SP Switch through the SP Switch
Router Adapter media card:
Figure 1-1. Connections between the SP Switch Router and an SP system
Configured with an IBM SP system, the SP Switch Router provides multiple media LAN and
WAN connectivity for the SP. The SP Switch Router Adapter card connects directly to the SP
Switch. Other components communicate across the administrative Ethernet network.
(While using a hub or a bridge to interconnect the administrative Ethernet segments is
common, other network components can be used to provide connectivity between the
segments.)
SP control workstation
Processor
node
SP Switch
to/from other networks and hosts
SP Switch Router
SP Switch
media card
• • •
Primary node
for SP Switch
Administrative network =
Switch
Router Adapter
control
board
Ethernet hub or bridge
Processor
node
• • •