Lexmark 4800 Series - Manual (Page 103)

Reconnect power supply
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
Disable anti-virus programs
1 Close all open software applications.
2 Disable any antivirus programs.
3 Double-click the My Computer icon.
In Windows XP, click Start to access the My Computer icon.
4 Double-click the CD–ROM drive icon.
5 If necessary, double-click setup.exe.
6 Follow the instructions on the computer screen to install the software.
Uninstall and reinstall software
Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the software”
on page 105.
Page does not print
These are possible solutions. Try one or more of the following:
Check messages
If an error message is displayed, resolve the error before trying to print again.
Check power
If the light is not on, make sure the printer is plugged into a properly grounded outlet. Make sure the power cord
is properly connected to the printer.
Reload paper
Remove and then load paper.
Check ink
Check the ink levels, and install new print cartridges if necessary.
103