Lexmark 4800 Series - Manual (Page 155)

Try the following:
• Before sending a document to print, close any other open programs. The printer may print a blank page when
too many programs are open on the computer.
• Follow the instructions on the error screen. These instructions reduce the amount of memory needed to print.
Out of Paper
1 Load paper.
2 Press to continue printing.
Note: Do not force paper into the printer.
Fixing a printing failure
Follow the instructions on the computer screen.
If the printer still does not print:
1 Do one of the following:
• In Windows Vista, click .
• In Windows XP and earlier, click Start.
2 Click Programs or All Programs
ΠLexmark 4800 Series.
3 Click Solution Center, and then click the Contact Information tab.
Paper Jam
The printer has a paper jam, and you must clear the paper path.
Note: To avoid paper jams, do not force paper into the printer.
Multiple All-In-Ones found
Multiple Lexmark printers, attached either locally or over a network, have been detected on your computer. You can
choose which printer you want to use:
1 Select the printer from the list.
2 Click OK.
Print File Error
To use the Print Files function, your printer must be connected to a computer, and both the printer and computer
must be on.
The error may include any of the following causes listed below.
Cause Solution
The printer failed to find an application or software on
the computer to print the file or files stored on the
memory device. Make sure you have software installed on your computer
that can open files with the desired file extensions.
The printer failed to retrieve the file or files stored on
the memory device. Make sure that:
• The memory device has not been removed.
• The memory card or flash drive is not damaged or
corrupted.
155