Lexmark 4800 Series - Manual (Page 63)

If the printer is connected to a wireless network, you will be asked to select the computer that you want to use.
a Press or to select a computer.
b Press .
If you set a PIN during network setup and are being asked for it:
1 Enter the PIN using the and to select a digit location and the and to select a value for that
digit.
2 Press .
c Press to begin saving photos to the computer.
d Follow the instructions on the computer screen.
Transferring all photos from a memory card using the computer
1 Insert a memory card into the printer with the label facing the printer control panel. If the computer is connected
to a wireless network, you will need to select the printer.
Note: For a network connection, you must manually open the application and select the printer you want to use.
The Productivity Studio software launches automatically on your computer.
2 Click Automatically save all photos to “My Pictures”.
3 If you want to erase the photos from the memory card, click Yes.
Note: Make sure all the photos have been copied before you click Yes to erase.
4 Click Done. Remove the memory card to view your transferred photos in the Library.
Transferring selected photos from a memory card using the computer
1 Insert a memory card into the printer with the label facing the printer control panel.
The Productivity Studio software launches automatically on your computer.
Note: For a wireless network connection, you must first open the application and then select the printer you
want to use.
2 Click Select photos to save.
3 Click Deselect All.
4 Click to select the photo(s) you want to transfer.
5 Click Next.
6 If you want to save the photos to the default folder, click Next.
7 If you want to save the photos in a folder other than the default folder:
a Click Browse.
b Select the folder you want.
c Click OK.
8 If you want to assign a prefix to all of the photos you just transferred, click the check box and enter a name.
9 Click Next.
63