Understanding warning levels – Lexmark 4800 Series User Manual
Page 104
Check cartridges
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
1
2
3
Reinsert the cartridges.
Check printer default and pause settings
1
Do one of the following:
•
In Windows Vista, click
Control Panel.
•
In Windows XP, click Start.
2
Click Printers
Printers and Faxes.
3
Double-click the printer queue device.
4
Click Printer.
•
Make sure no check mark appears next to Pause Printing.
•
If a check mark does not appear next to Set As Default Printer, you must select the print queue device for
each file you want to print.
Reconnect power supply
1
Press
to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Gently remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press
to turn the printer on.
Remove and reinstall the software
Uninstall the printer software, and then reinstall it.
Understanding Warning levels
•
A green check indicates system requirements were met.
•
A yellow question mark indicates system requirements were not met. Most major functions will work, but you
may experience some performance impact.
•
A red question mark indicates system requirements were not met. Most major functions may not work.
•
A red X indicates system requirements were not met. Installation will not continue.
For proper installation, make sure the computer supports all system requirements. System requirements are located
on the printer box.
104