Removing and reinstalling the software, Enabling the usb port – Lexmark 4800 Series User Manual
Page 105
Removing and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when you try to use the
printer, you may need to remove and reinstall the printer software.
1
In Windows Vista, click
. In Windows XP or earlier, click Start.
2
Click Programs or All Programs
Lexmark 4800 Series.
3
Select Uninstall.
4
Follow the instructions on the computer screen to remove the printer software.
5
Restart the computer before reinstalling the printer software.
6
Click Cancel on all New Hardware Found screens.
7
Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
Note: If the install screen does not appear automatically after you restart your computer, click Start
Run, and
then type D:\setup, where D is the letter of your CD-ROM drive.
If the software still does not install correctly, visit our Web site at o check for the latest software.
1
In all countries or regions except the United States, select your country or region.
2
Click the links for drivers or downloads.
3
Select your printer family.
4
Select your printer model.
5
Select your operating system.
6
Select the file you want to download, and then follow the directions on the computer screen.
Enabling the USB port
To confirm that the USB port is enabled on the computer:
1
Open the Device Manager.
In Windows Vista:
a
Click
Control Panel.
b
Click System and Maintenance
System.
c
Click Device Manager.
In Windows XP:
a
Click Start.
b
Click Control Panel
Performance and Maintenance System.
c
From the Hardware tab, click Device Manager.
In Windows 2000:
a
Click Start.
b
Click Settings
Control Panel System.
c
From the Hardware tab, click Device Manager.
2
Click the plus sign (+) beside Universal Serial Bus Controller.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.
105