Printing iron-on transfers, Printing transparencies, Printing a banner – Lexmark 4800 Series User Manual
Page 53
6
From the Paper Size section, select Paper and then select Custom Size.
7
Select the measurement units to use.
8
Use the sliders, or type the size of the paper loaded into the printer.
9
Click OK to close any printer software dialogs that are open.
10
Print the document.
Note: Do not force paper into the printer.
Printing iron-on transfers
1
Load up to 10 iron-on transfers.
2
With an image open, click File
Print.
3
Click Properties, Preferences, Options, or Setup.
4
From the Print Layout tab, select Mirror if you want the printer software to flip the image.
Select Normal if you have a program that automatically flips the image.
5
Click OK to close any printer software dialogs that are open.
6
Print the iron-on transfers.
Note: Do not force iron-on transfers into the printer.
Printing transparencies
1
Load up to 50 transparencies.
2
With a document open, click File
Print.
3
Click OK or Print.
Note: To prevent smudging, remove each transparency as it exits, and let it dry before stacking. Transparencies
may require up to 15 minutes to dry.
Printing a banner
1
With a document open, click File
Print.
2
Click Properties, Preferences, Options, or Setup.
3
From the Print Layout tab, select Banner.
Note: After you print a banner, return the setting to Normal.
4
To keep banner paper from jamming, select Letter Banner or A4 Banner from the Banner Paper Size dialog.
5
From the Paper Setup tab, select Landscape orientation.
6
Click OK.
7
Click OK or Print.
53