Check printer ports (windows users only), Print troubleshooting – Lexmark 4800 Series User Manual

Page 117

Advertising
background image

Resetting an internal wireless print server to factory default settings

1

From the control panel, press

or

repeatedly until Setup appears.

2

Press .

3

Press

or

repeatedly until Network Setup appears.

4

Press .

5

Press

or

repeatedly until Reset Network Adapter Defaults appears.

6

Press .

The following message appears: This will reset all wireless network settings. Are you
sure?

7

Press to select Yes.

The message Clearing Network Settings appears.

Check printer ports (Windows users only)

Make sure the correct printer port is selected.

1

Click Start

ΠControl Panel ΠPrinters.

2

Right-click Lexmark XXXX, where XXXX is the model series number of your printer.

3

Click Properties

ΠPorts.

4

Verify that XXXX_Series_nnnnnn_P1 is selected, where XXXX is the model series number of your printer and
nnnnnn is the last six numbers of the MAC address of your printer.

Note: The MAC address is located at the back of the printer beside the serial number.

5

If USB is selected instead:

a

Select the port name from step 4.

b

Click Apply.

c

Close the window, and try printing again.

Print troubleshooting

Partial 4 x 6 in. (10 x 15 cm) photo prints when using a PictBridge-enabled
digital camera

Make sure photo size and paper size are set correctly

The printer displays Paper Mismatch when your chosen photo size does not match the paper size that is set. This
typically happens when you are trying to print from your PictBridge-enabled digital camera. You may have left the
printer control panel Photo Size menu item setting at 8.5 x 11 in. or 5 x 7 in. size, but your camera has a
print size of 4 x 6 in. or L. You need to make sure your chosen photo size on the printer is 4 x 6 in. or
10 x 15 cm

, depending on the typically used photo size for your country or region.

Make sure the 4 x 6 in. (10 x 15 cm) photo paper is loaded correctly in the paper support.

If your camera lets you change the print size setting, change the print size selection to 4 x 6 in. (10 x 15 cm) on
the PictBridge-enabled digital camera.

117

Advertising