Lexmark 4800 Series - Manual (Page 88)

4 Change the settings as needed.
Setting Options
Color Depth Select Color, Grey, or Black and White.
Scan Resolution (Dots Per Inch) Select a scan resolution value from the drop-down list.
Size • You can auto-crop the scanned item.
• You can select the area to be scanned. From the drop-down list,
select a paper source.
Select area to be scanned Select the area to be scanned by choosing a paper size from the
drop-down list.
Convert the image to text with OCR Convert an image to text.
Always use these settings when
scanning Make your selections permanent by selecting the check box.
Understanding the Scan Mode menu
To access the Scan Mode menu:
1 From the control panel, press or repeatedly until Scan is highlighted.
2 Press .
3 If your printer is connected to more than one computer:
a Press or repeatedly until the computer to which you want to scan is highlighted.
b Press .
If you set a PIN during network setup and are being asked for it:
1 Enter the PIN by pressing and to select a digit location, and then press and to select a value
for that digit.
2 Press .
4 Wait until the printer has finished downloading the scan applications list.
From here You can
Scan to Choose the computer to save your scan if there is more than one computer connected
to the printer.
Color Choose to scan your document in color or black and white.
Quality Choose a scan quality: 150 dots per inch (dpi), 300 dpi, or 600 dpi.
Original Size Set the size of the original document: Auto Detect, L, 2L, A6, A5, B5, A4, Wallet, 3x5
in, 4x6 in, 4x8 in, 5x7 in, 8x10 in, or letter.
Change Scan Default
Settings Change the default scan settings. These settings include: Color, Quality, and Original
Size.
88