Troubleshooting and repair, Contactor & contactor pc board test (continued) – Lincoln Electric LN-25 SVM114-C User Manual
Page 64
Advertising
TROUBLESHOOTING AND REPAIR
F-26
F-26
LN-25™
CONTACTOR TEST PROCEDURE
1. Open the case door. Remove the wire reel by
removing the retaining collar. See Figure F.5.
2. Remove the screws holding the control box
cover in place and remove the control box
cover. See Figure F.5.
3.Separate the two in-line connectors located behind
the reel stand assembly. See Figure F.13. For
c o d e s 9 8 1 2 a n d b e l ow, r e m ove t h e t wo
contactor coil leads from the contactor PC
board. See Figure F.14.
CONTACTOR & CONTACTOR PC BOARD TEST (continued)
FIGURE F.13. – CONTACTOR LEAD IN-LINE CONNECTORS.
IN-LINE
CONNECTORS
Advertising