Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 101)

Issue 1 April 1997 95
Feature Descriptions
2. Dial the security code __________.
■ You hear another dial tone.
3. Dial the extension number being used for that telephone.
■ You hear confirmation tone if the change was accepted.
4. Disconnect the telephone from the wall jack.
Administration 0
change system-parameters customer-options
■ Enter y in the Terminal Trans. Init. (TTI) field to enable the
TTI feature for the server. This option defaults to y, and can be changed
only by Lucent Technologies personnel.
change feature-access-codes
■ On Page 3 of this form, add a feature access code for merging and sepa-
rating a TTI port.
change system-parameters feature
■ On Page 2 of this form, enter y in the TTI Enable field. When this field
is enabled, the TTI State field displays the current TTI status. The pos-
sible values include voice, data, suspend, and resume.
■ On Page 2 of this form, add a TTI security code in the TTI Security
Code field. The security code can be from 1 to 7 digits.
!
SECURITY ALERT:
Always use a 7-digit security code for the best security against
hacking. Always use random digits, never repetitive or sequential.
Never give out the security code to unauthorized personnel.
Change the code at least every 90 days.