Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 84)

78 Issue 1 April 1997
Property Management System (PMS) Interface
■ Status inquiry (checks on status of data link)
■ Room data image (occupied/vacant, message waiting lamp status, con-
trolled restriction level)
■ Room change.
Transparent Mode or ASCII Mode can do all the Normal Mode transactions plus
these additional transactions (shown in bold):
■ Check-in with guest name
■ Guest information (in and out/change, guest name, coverage path)
■ Room data image (occupied/vacant, message waiting lamp status, con-
trolled restriction level, guest name, coverage path)
■ Leave Word Calling (LWC) and voice messages can be used along
with the Message Waiting Notification feature.
The PMS cannot turn on or off LWC or voice messages. The LWC and
voice message lamps are controlled by the server.
■ Room change/swap
■ 5-digit extensions.
This section gives a basic overview of how the GuestWorks server interacts
when connected to a PMS. For a more detailed description of the PMS
interface, see the
DEFINITY Enterprise Communications Server (ECS),
GuestWorks server, and System 75 PBX Property Management System
Interface Specifications, (555-231-601). All approved PMS products must
adhere to this specification. The document establishes the standard code so the
server and PMS can communicate.