Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 33)

Issue 1 April 1997 27
Feature Descriptions
■ Music on hold, where the guest hears music when the wakeup call is
made, but hears no other special message.
■ Customized announcements recorded on the Audichron Recording
device which delivers sales pitches for various hotel functions with the
wakeup call. Audichron can be equipped with time and temperature cir-
cuitry which enables the wakeup announcement to give the time and
temperature. Audichron uses all four ports on a TN763D auxiliary trunk
circuit pack.
■ Silence; the least expensive. The phone only rings and, when answered,
the guest hears silence.
Wakeup calls ring at a guest’s room telephone for 30 seconds. The wakeup call
is repeated three times in 5-minute intervals if the guest does not answer the
call. If the guest does not answer the wakeup call, a lamp on the attendant
console and the backup voice terminals goes on. The attendant or backup voice
terminal user presses a button labeled
, and the display shows the
failed wakeup information. With this notification, you can contact the guests to
see if there are any problems since they did not answer their wakeup call.
NOTE:
The button is administered as an Automatic Message Wait-
ing extension. All failed wakeups send a message to that extension, and
the lamp goes on at the attendant console or backup voice terminal.
The integrated announcement circuit pack is the most flexible of all wakeup
announcements. With this type of announcement, it is possible for the attendant
to select from a variety of wakeup announcements. When the attendant enters a
wakeup time, he or she designates the appropriate message based on the time
of the wakeup call or the language required.
Failed Wakeup
Failed Wakeup