Lucent Technologies Guestworks SErver 1079984G3 - Manual (Page 32)

26 Issue 1 April 1997
Automatic Wakeup
Automatic Wakeup 0
Wakeup calls can be activated by guests from their own room or from the front
desk using the attendant console or a backup voice terminal. If the Dual
Wakeup feature is enabled, each extension can have two wakeup calls active
within one 24-hour time period.
Guest activation of wakeup calls are allowed under two conditions:
■ If the server has a speech synthesizer circuit pack (TN725B), guests are
allowed to activate one wakeup call. The speech synthesizer circuit pack
uses voice prompts to guide the guest through the steps required to acti-
vate or cancel a wakeup call.
■ If the server does not have a speech synthesizer circuit pack, the guests
can use the Wakeup Activation via Tones feature to activate and cancel
their wakeup calls. If the Dual Wakeup feature is enabled, guests can cre-
ate two wakeup calls.
Activation of wakeup calls from the attendant console are done the same way
regardless if the server has a speech synthesizer circuit pack.
The server can place up to 150 wakeup calls in one 15-minute interval, and
there can be a total of 800 wakeup requests at one time. The server delivers a
wakeup call every 2 seconds and up to 800 wakeup calls in a 15-minute time
period as shown above. For example, if many guests select 6:00 a.m. for a
wakeup call, some of the wakeup calls will arrive after 6:00 a.m.
Once a wakeup call is requested, there are several ways the wakeup call can be
delivered:
■ The speech synthesizer circuit pack, where the wakeup message
depends on the time of day.
■ The Integrated Announcement circuit pack (TN750C), which provides
customized wakeup messages. The messages can range from very sim-
ple to a complete sales message in various languages.