Panasonic KX-FP195 - Manual (Page 18)

18
Quick Start
For Assistance, Call 1-800-435-7329
B
a
s
ic
o
p
e
ra
ti
o
n
s
Document
feeder tray
(RESOLUTION)
Transmitting documents
1 Open the document feeder tray.
2 Insert the document FACE DOWN (up to
15 sheets) until a beep tone is heard.
3 Adjust the document guides to the width of the
document.
4 Press (RESOLUTION) repeatedly to the desired
setting, if needed (see page 17).
5 Press (SP-PHONE) or lift the handset.
6 Dial the phone number.
¡ If you misdial, hang up and dial again.
7 When a fax tone is heard, press
(START/COPY/SET) .
8 Hang up the handset, if using it.
Note:
¡ If the other party answers your call, ask them to start
receiving a fax, then press your
(START/COPY/SET) .
FACE DOWN
Dial keypad
(START/COPY/SET)
(STOP)
(SP-PHONE)
Document guides
To stop transmission
Press (STOP) .
¡ To eject the document, press (STOP) again.
128 mm
(5 w )
128 mm
(5
w
)
600 mm
(23
5
⁄ 8
w
)
216 mm
(8 1 ⁄
2
w )
Paper width
216 mm (8 1 ⁄
2
w )
208 mm (8 3 ⁄
16
w )
Scanned
area
4 mm
Minimum size Maximum size Effective scanning area Document weight
Single sheet:
45 to 90 g /m 2 (12 to 24 lb.)
Multiple sheets:
60 to 75 g /m 2 (16 to 20 lb.)
Documents the unit can feed
Note:
¡ Remove clips, staples or other similar fastening objects.
¡ Check that ink, paste or correction fluid has dried.
¡ Do not send the following types of documents. Use copies for fax transmission.
— Chemically treated paper such as carbon or carbonless duplicating paper
— Electrostatically charged paper
— Heavily curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)