Panasonic KX-FP195 User Manual
Page 34
1
2
3
4
5
6
7
8
9
0
34
Transmitting documents from memory
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 28 pages for the KX-FP200 and approx. 14 pages for the KX-FP195, based
on CCITT No. 1 test chart in standard resolution. For the CCITT No. 1 test chart, see page 74.
Setting the memory transmission
1
Press
(MENU)
.
Display:
2
Press
K
, then
A E
.
3
Press
(START/COPY/SET)
.
4
Press
or
to select “ON”.
¡
If this feature is not required, select “OFF”.
5
Press
(START/COPY/SET)
.
6
Press
(MENU)
.
MODE=ON [
Ÿÿ
]
MODE=OFF [
Ÿÿ
]
MEMORY XMT
SYSTEM SET UP
Transmitting documents from memory
1
Insert the documents FACE DOWN.
2
Enter the phone number by using regular dialing,
one-touch dialing, speed dialing or the electronic
telephone directory.
3
When using regular dialing, press
(START/COPY/SET)
.
¡
The documents will be fed into the unit and
scanned into memory.
After storing all pages, the unit will transmit the
documents.
¡
The amount of memory used will be shown as a
percentage on the display.
Display:
Amount of memory used
PAGES=01 05
Note:
¡
The stored documents will be automatically erased after transmission.
¡
To cancel the memory transmission, press
(STOP)
during or after scanning the documents.
¡
If you select the fine, super fine or halftone resolution, the number of documents that can be sent will be
decreased.
¡
If the stored documents exceed the memory capacity, the transmission will be canceled.
(MENU)
(START/COPY/SET)
Dial keypad
Dial keypad
FACE DOWN
(STOP)
(START/COPY/SET)