Panasonic KX-FP195 - Manual (Page 36)

36
Transmitting documents to multistations
(cont.)
Transmission using the BROAD CAST key
The documents will be scanned and stored into memory when using the BROAD CAST key. After
transmission, the stored documents will be erased automatically.
The memory capacity is approx. 28 pages for the KX-FP200 and approx. 14 pages for the KX-FP195, based
on CCITT No. 1 test chart in standard resolution. For the CCITT No. 1 test chart, see page 74.
1 Insert the documents FACE DOWN.
2 Press (BROAD\CAST) .
¡ The documents will be fed into the unit and
scanned into memory. Then the unit will transmit
the data to each station, calling each number
sequentially.
Note:
¡ If you select the fine, super fine or halftone resolution,
the number of documents that the unit can transmit will
be decreased.
¡ If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 5 times after all of the other stations
have been called.
Multitransmission report
After all of the transmissions have been completed, the unit will automatically print the following report.
Sample of a multitransmission report:
Jan. 10 1997 03:36PM
NO. OTHER FACSIMILE START TIME USAGE TIME TX PAGES RESULT
001 <S02> Jan. 10 03:31PM 01’10 02 OK
002 <S03> Jan. 10 03:33PM 01’08 02 OK
003 <S04> Jan. 10 03:34PM 01’09 02 OK
004 <A05> Jan. 10 03:35PM 01’10 02 OK
TOTAL 004’37 008
MULTI TRANSMISSION REPORT
(1/1)
Canceling the broadcast setting
1. Press (STOP) during idle status.
Display:
2. Press (START/COPY/SET) .
=YES [ Ÿÿ ]
CANCEL BROAD.
3. Press or to select “YES”.
4. Press (START/COPY/SET) .
(START/COPY/SET)
(BROAD\CAST)
(STOP)
FACE DOWN