Panasonic KX-FP195 - Manual (Page 24)

1 2 3
4 5 6
7 8 9
0
24
EXT.TAM mode
(cont.)
Securing the remote operation for the answering machine
(remote TAM activation ID)
Some remote codes on your answering machine may be same as the remote fax activation code on the
facsimile unit. This feature prevents the facsimile unit from activating the fax function when you operate the
answering machine from a remote location using the same remote code.
Set the same remote access code on the answering machine to the facsimile unit as the remote TAM
activation ID.
Important:
¡ This ID should be different from the remote fax activation code (see page 38).
1 Press (MENU) .
Display:
2 Press K , then A B .
3 Press (START/COPY/SET) .
4 Press or to select “ON”.
5 Press (START/COPY/SET) .
¡ The display will show the pre-selected ID.
¡ This ID can be from 1 to 5 digits in length
using numbers 0 through 9, and the characters
* and #.
ID=11
MODE=ON [ Ÿÿ ]
MODE=OFF [ Ÿÿ ]
REMOTE TAM ACT.
SYSTEM SET UP
(MENU)
(START/COPY/SET)
Dial keypad
Leaving a voice message and sending fax documents to
your unit
The caller can leave a voice message and send a fax document in the same call.
Inform the caller of the following procedures beforehand.
1. The caller calls your unit.
¡ The external telephone answering machine will answer their call.
2. The caller can leave their message after the greeting message.
3. Have the caller press J I (remote fax activation code).
¡ The facsimile unit will activate the fax function.
4. The caller must then press their start button to send a document.
Note:
¡ The remote fax activation code can be changed. See page 38.
6 Enter your remote TAM activation ID number
using the dial keypad.
7 Press (START/COPY/SET) .
8 Press (MENU) .