Panasonic KX-FP195 - Manual (Page 38)

1 2 3
4 5 6
7 8 9
0
38
Receiving using an extension phone
1 Press (MENU) .
Display:
2 Press K , then D A .
3 Press (START/COPY/SET) .
4 Press or to select the desired setting.
¡ If this feature is not required, select “OFF”.
5 Press (START/COPY/SET) .
6 Enter the new code number.
7 Press (START/COPY/SET) .
8 Press (MENU) .
CODE= U 9
MODE=ON [ Ÿÿ ]
REMOTE FAX ACT.
SYSTEM SET UP
Remote fax receiving
(using an extension phone to receive a fax message)
If you have an extension phone connected to your facsimile unit or on the same line, it is possible to receive a
manual fax message. Using the extension phone, dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing
(START/COPY/SET) .
Important:
¡ To activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY.
¡ The remote fax activation code is set to “ U 9” as a pre-selected setting.
1 When a call is received, lift the handset of the
extension phone.
2 When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter the remote fax activation code FIRMLY.
3 Hang up the handset.
¡ The facsimile unit is activated for reception.
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9, and the character * .
Note:
¡ Some special telephone company services
will require you to press a service access
code. If you subscribe to such services, all or
part of the remote fax activation code must
be different from the service access code.
¡ If the remote fax activation code is set to
“0000”, this feature will not work properly.
To EXT jack or
the same line
Extension phone
(MENU)
(START/COPY/SET)
Dial keypad
Special receiving features