Chapter 2: installation, Operating environment, Mounting – Phonetics Boat Remote User Manual
Page 17
17
Chapter 2: Installation
CHAPTER 2:
INSTALLATION
C
orrectly installing Boat Remote will ensure proper functioning of
the unit. Please read the entire chapter before starting the
installation process. Failure to properly install the unit will result
in erratic operation, shortened product life and a void warranty.
Within the packaging will be a warranty registration card. Please take
the time to fill this out and mail it. The One Year Limited Warranty is
explained in the back of this manual.
Operating Environment
The Boat Remote should be installed and operated in an area that
provides space for wiring sensors to the unit, near an AC outlet and
telephone line. The operating temperature range of the unit is -10
° C
to 50
° C (14° to 122°F). Do not mount the unit in direct sunlight or in
an area where it can get wet. The unit is designed to be mounted in
a dry, interior area of your boat.
Mounting
The Boat Remote is designed to be wall mounted using the four
screws included. Attach two screws to the wall 5.3" apart, at the
desired height from the floor. Place the Boat Remote over the two
screws and slide the unit down. Remove the access panel and
attach the remaining screws into the two holes in the interior area of
the enclosure. Refer to Fig. 2.1.
Fig. 2.1 Mounting the Boat Remote