Phonetics Boat Remote - Manual (Page 29)

Chapter 3: Programming
29
scroll through the rest of the menu using the down arrow.
Press the
SET
key on the keypad.
Press
SYSTEM
.
The Local Display will prompt you to set the following System
Parameters:
Maximum Calls:
Call Delay:
Intercall Dly:
Dialing Method:
Maximum Number of Calls
The Maximum Number of Calls feature controls the total number of
repeated calling attempts by the Boat Remote in the event of an
alarm. When an alarm occurs, the dial out process begins, and Boat
Remote continues to cycle through your programmed phone
selection until the maximum number of calls is reached
Maximum Number of Calls is cancelled when an alarm is acknowl-
edged. If the Maximum Number of Calls is completed and no alarm
acknowledgment has occurred, the Boat Remote will automatically
acknowledge any alarm and stop the dial out.
The Maximum Number of Calls setting regulates the number of calls
that will be made as a result of any alarm; if more than one alarm is
detected at once, or if a second alarm occurs during dial out on the
first alarm, the Maximum Number of Calls setting will start the calling
process from zero, until the programmed number of calling attempts
are completed.
*In the event that only one phone number is programmed for dial out,
the Boat Remote will automatically stop dial out at 15 calls, in
accordance with FCC regulations.
Program Max Calls
The default setting for Max Calls is 100 calls, but may be pro-
grammed from 0 to 255 calls. If set at 0, no calls will be made.