Phonetics Boat Remote - Manual (Page 83)

Appendix C: Engineering Specifications
83
I. General
The Automatic dialer shall be a self-contained microprocessor
controlled system capable of monitoring 10 alarm channels. The
system shall be configured for operation by the user by means of
the built-in keypad. The system shall have one alarm output.
Characteristics of Input and Output channels include Dry Contact
Input, 12V Run Time Input, 0-16V Analog Input, 10K Thermistor
Input and 12VDC Output.
Upon detection of any alarm or status change, the system shall
commence dialing telephone numbers from a list associated with
the particular alarm condition(s). The alarm message shall be
delivered in digitized human voice using messages recorded by the
user. The system will continue to call telephone numbers in
succession until a positive acknowledgment of the alarm message
is received. Acknowledgment is accomplished by depressing tone
keys from the called telephone, or by calling the system back within
a programmed time period. The alarm may also be acknowledged
by using the local keypad. In addition, the system shall be able to
receive incoming telephone calls. Upon answering, the system
shall recite a status report.
The system shall be FCC registered for direct connection to the
telephone network. The system shall have a one year warranty
from the manufacturer. The system shall be a Boat Remote by
Phonetics, Inc.
II. I/O Channel Attributes and Features
A. Inputs
The system shall come standard with (2) Bilge Pump Inputs, (1)
High Water Input, (3) Temperature Inputs, (1) Security Input, (1)
Auxiliary Input and (1) 12V Battery Input.
The system shall have the following built-in monitoring features:
1. AC Power failure detection
2. Temperature with pre-wired 10K thermistor (-20F to 160F)
All monitored channels, including built-in monitoring features, shall
APPENDIX C:
ENGINEERING SPECIFICATIONS