Phonetics Boat Remote - Manual (Page 49)

Chapter 3: Programming
49
Press the
MODE
key on the keypad until the appropriate mode is
shown on the display. The default for Temperature Input #1 is Active.
The default for Temperature Inputs #2 and #3 is Off.
Press the
MODE
key to toggle through the three input modes.
Press
ENTER
.
The display will prompt you to enter the Temperature Input phone
selection. Use the number keys to select the phone numbers to be
dialed when the Temperature Input is in alarm. You can choose all of
the eight numbers that you programmed for dial out, or any combina-
tion of the eight numbers. Remember, regardless of what order you
enter your Input phone selections, the phone numbers will be dialed
in order, according to their sequence number (1-8). The display will
reflect this.
Use the number keys.
Press
ENTER
.
The display will reflect your selection.
Phone Selection:
1,2,4,6